Healing Sounds and Didgeridoo Circle

Every thursday at 8:00 P.M.
7111 Santa Fe Ave. in Dallas.
Call 214-xxx-xxxx

...Coming together in sharing via sound thereby sharing spirit...

Here are some samples of various didge sounds that you might hear at the circle:
Ahtataweeah 
Tidotidotido Teetaweetoot
 TwilightZoneish  Kookabura GutslappingIt

Here are some pictures of a typical gathering:
Pictures

Here are some useful links:
  Gilbert's Didgeridoo Construction Techniques
Gilbert's and Drum Store
Dreamtime: The Definitive Didgeridoo Resource 
 Mainz Trading:Where I buy my Eucalyptus Didges 

For more information email me at gcaceres at swbell.net Please Sign My Guestbook
Warning all material on this page copyrighted!
You are the  visitor to this page.
 
 
 
 

 

The Pictures

The Didges !The Didgeridoos!

The Toys! The Toys!

Jennifer, Leslie, and MichaelJennifer, Lindsey, and Michael

Jan, Jennifer, and Lindsey

Jeremy, Gilbert, and Visiting Zen MonksJeremy, Gilbert and Visiting Zen Monks

Cathleen and ShriCathleen and Shri

Michael and JuliusMichael and Julius
 
 

BACK TO TOP

Gilbert's Didgeridoo Construction Techniques for a Didge in the key of 'D'

  • 2" PVC pipe (More closely resembles an actual Eucalyptus Didgeridoo with regards to shape,size, etc.)
  • Propane Torch
  • Hacksaw
  • Shaping Medium (Bottle or Red Clay flower pot)
  • Beeswax (available at your local Health Food Store like Whole Foods)
  • Sandpaper (optional)
    • 1.  Cut pipe to 46 3/8  inches for "D" didge.
    2.  Slightly sand the rough cut edge with sandpaper or just scrape it on a concrete floor to smooth the edge.
    3.  Heat the rough end with the propane torch all around and up to about a 4 inches from the end.  It will begin to soften.
         When it does force the pipe onto the bottle or flower pot to create a flared bell bottom.
         I like to actually wait until it flames up a little bit which will give you some nice exterior cracks on each end.
     4. Heat the mouth end (use the smooth unsawed end) into the flower pot to taper the PVC in from the 2'' diameter to about 1 1/8 inches.
    5.  You have now created a didgeridoo.
    6.  You will have to wash it with a detergent (dishwashing detergent will do) to remove the burnt PVC smell.
    7.  Now you are ready to decorate it.  You can use acrylic paint after sanding the PVC lightly so the paint will adhere.
        Spray spackling works well (available at Home Depot $8.00) after you paint it.  I like to burn it with a propane torch to
        give it a woodsy look.  I follow this with a light sanding to give it a satiny feel.

    (CHECK BACK  SOON FOR PICTURES OF  DIDGES)
    (ALSO SOON CONSTRUCTION TIPS FROM OTHER MEMBERS OF THE CIRCLE)

    BACK TO TOP

     



    1