Station Q - M2 Caliber .50 Heavy Machine Gun - Point Q-1 For use of this form, see USAIC Pam 350-6. The proponent is USAIS, DOTD.
Candidate's Name______________Rank________Unit_________________
TASK 1: LOAD A M2 CALIBER .50 HEAVY MACHINE GUN.
TASK 2: CORRECT A MALFUNCTION OF A M2 CALIBER .50 HEAVY MACHINE GUN.
TASK 3: UNLOAD A M2 CALIBER .50 HEAVY MACHINE GUN.
1. Loaded the M2 caliber .50 Heavy Machine Gun.
a. Ensured that bolt was forward and that cover was closed.
b. Inserted double-loop end of belt in feedway.
c. Pulled the bolt to the rear twice.
d. Locked bolt latch release down with bolt latch release lock.
e. Fired M2 caliber .50 Heavy Machine Gun.
Completed performance measures a through e within 10 seconds and in sequence.
2. Performed immediate action.
a. Pulled the bolt to the rear and ejected the malfunctioning round within 10 seconds.
b. Resumed firing.
3. Unloaded and cleared the M2 caliber .50 Heavy Machine Gun (Cold gun)
a. Unlocked the bolt latch release and raised cover.
b. Lifted the extractor from the ammunition belt
c. Lifted ammunition belt from feedway.
d. Pulled the bolt to rear.
e. Ensured that T-slot and chamber held no rounds
Completed performance measure a through e within 10 seconds.
CHECK: PASS______ FAIL______
REASON(S) FOR FAILURE
__________________________________________________
__________________________________________________
__________________________________________________
SCORER'S SIGNATURE________________DATE________________
Is this a retest? YES______NO______
FB FORM 20-34-R, 17 JAN 97