FIREING THIS SUCKER

Now comes the fun part. An entire day's toil is now put to the test. If I were you, I would find a large field to shoot in, aswell as neighbours who don't mind alot of loud booms.

Be sure to have brought a full can of propellant along with alot of ammo because trust me, these things get addictive, heh heh heh.

Procedure:

Before you go using this PCM, you should rig it to some sort of a stand. I would hope that you wouldn't hold this thing (it's designed to act like a mortar) because it really is powerful. Tie it into a small wagon or wheelbarrow (it saves building something) or if you are creative make it an adjustable "seat" or platform. Remember, build like a mortar, it WILL fire quite a large projectile in a direction in sort of a lob. Not meant to be fired perpendicular or so to the ground. Thank you!! have fun.

1) Screw off the end-plug, then grab some ammo.
2) Slice it on the end of the barrel, because that way it's a perfect seal.
3) Use your ramrod to push it all the way down the barrel to your pre-determined point.
4) Turn the cannon around and "mist" a HUGE amount of propellant into the combustion chamber. With this monster you can never have enough propellant.

**note: It is recommended that two people perform step4. It goes a lot faster and you need a hell of a lot of propellant to make this gun perform!!!

5) Quickly screw on the end-plug, BUT NOT TOO TIGHT !!
6) Angle the cannon where you plan to shoot.
7) Press the igniter button and hope tah high hell that it works.

*If it don't work, click the button a few more times. If it still don't work spray more propellant into the combustion chamber and try it again. Hopefully this doesn't blow your arm off...heheheh

Main Page

This page hosted by

Get your own Free Home Page