Question : You have the following domain configuration in
your company:
SALES ---> CORP <-- RESEARCH
(1 PDC, 2 BDC's (1 PDC, 3 BDC's (1 PDC, 1
BDC,
1 member server 2 member servers 200 NT
Workst.)
300 NT Workst.) 500 NT Workst.)
Required results:
A group called AllBackup must be created in the CORP
domain.
Members of the AllBackup group must be able to backup
all domain
controllers in all domains.
Optional results:
Members of the Allbackup group must be able to backup
all member
servers in all domains.
Members of the Allbackup group must be able to
backup all NT
Workstations in all domains.
Proposed solution:
Make a global group CORP\AllBackup. Make the local groups
CORP\CBackup,
RESEARCH\RBackup and SALES\SBackup.
Assign the following special users rights to the local
groups: Backup
Files and Restore Files. Put the global group
CORP\AllBackup in each
local group.
What does the proposed solution produce?
a. The required result and the optional results.
b. The required result and one of the optional
results.
c. The required result only
d. Does not produce the required result or the
optional results.
Answer: c
Question : You have the following domain configuration in
your company:
SALES ---> CORP <-- RESEARCH
(1 PDC, 2 BDC's (1 PDC, 3 BDC's (1 PDC, 1
BDC,
1 member server 2 member servers 200 NT
Workst.)
300 NT Workst.) 500 NT Workst.)
Required results:
A group called AllBackup must be created in the CORP
domain.
Members of the AllBackup group must be able to backup
all domain
controllers in all domains.
Optional results:
Members of the Allbackup group must be able to backup
all member
servers in all domains.
Members of the Allbackup group must be able to
backup all NT
Workstations in all domains.
Proposed solution:
Make a global group CORP\AllBackup. Make the local groups CORP\CBackup,
NEW twist
RESEARCH\RBackup and SALES\SBackup.
Assign the following special users rights to the local
groups: Backup
Files and Restore Files. Put the global group
CORP\AllBackup in each
local group.
Put the global group CORP\AllBackup in the local 'Backup operators'
group on each member server and workstation in all
domains.
What does the proposed solution produce?
a. The required result and the optional results.
b. The required result and one of the optional
results.
c. The required result only.
d. Does not produce the required result or the
optional results.
Answer: a
Question: You are the system manager of a company with 3
departments:
Management, Marketing and Accounting.The departments print
all to the same
pool of 2 identical printers. Accounting uses often heavy
calculation
software which pauses and slows down the print process.
Your job is to
optimize the printing process. The amount of printerload
for each department
is shown in the following
table:
Department av. pages printer per day
Management 1-250
Marketing 250-500
Accounting 500+
Required Results:
Print jobs from the Management department must always
be printed
first.
Print jobs from the Accounting departments may only
print at one print
device.
Optional Results:
Print jobs from the Management and Marketing
department must be
processes before any large printjob from the Accounting
department.
Prevent the calculations of the accounting department of
slowing down
the print process.
Proposed solution:
You are setting up the printer configuration as shown
in the table
below:
Management Marketing
Accounting
Spooling method spool after first spool after first
spool after last
page is printed page is printed
page is printed
Priority +15 +10
+1
Rights Everyone: removed Everyone: removed
Everyone: removed
Management: Print Marketing: Print
Accounting: Print
Print device pool pool
one port
What does the proposed solution produce?
a. The required result and the optional results.
b. The required result and one of the optional
results.
c. The required result only.
d. Does not produce the required result or the
optional results.
Answer: a
Question: You are the administor of the following
network:
Exhibit showing Caracas, Paris, Dallas, Atlanta and
Seattle domains ALL trust Chicago domain.
Required Results:
Network lines may not be saturated with logon
validations
Users from caracas and paris domain must access
resources on chicago
Users from chicago must access resources on seattle,
dallas and Atlanta
Optional Results:
centralized user managment
Administrators may not manage their own resources. NEW twist!
Proposed Solution:
Use the single master domain model
Place a PDC and one BDC in chicago
Place a BDC for the chicago domain in each other
domain
What does the proposed solution produce?
a. The required result and the optional
results.
b. The required result and one of the optional
results.
c. The required result only.
d. Does not produce the required result or the
optional results.
I answered b However, I am not sure of this at all because if there
is only a one-way trust from all domains mentioned above to the Chicago
domain, how can the required result "Users from Caracas and Paris must
access resources on Chicago" be fulfilled??? I wanted to answer d but
didn't.
Did not get this question but here it is anyway:
Question: Same situation as in the previous Question
Proposed Solution:
Use the multiple master domain model
Place a PDC and one BDC in chicago
Place a BDC for the chicago domain in each other
domain
What does the proposed solution produce?
a. The required result and the optional results.
b. The required result and one of the optional
results.
c. The required result only.
d. Does not produce the required result or the
optional results.
Answer: a (see question 4 for possible conflict with required result)
Did not get this question but here it is anyway:
Question: You are checking the disk performance of a workstation in your
domain from your PDC.You see that all disk statistics are
at 0 (zero), what
is the most possible cause of this?
a. Workstation service does not run on the
workstation
b. Server service does not run on the workstation
c. diskperf -y has not beennot started on the
workstation
d. diskmanager has not been not started on the
workstation
Answer: c
Question: You two domains, WEST and CORP. WEST trust CORP.
Somebody logs
in from a workstation in the WEST domain onto the CORP
domain Which
resources can be accessed?
a. all resources which are given rights to the corp\Domain
users group
b. all resources which are given rights to the
corp\Domain guests group
c. all resources which are given rights to the
west\Domain users group
d. all resources which are given rights to the
west\Domain guests group
Answer: a
Did not get this question but here it is anyway:
Question: You have a PDC which does run WINS and it's only
function is
account validation. How can you optimize the performance
of this domain
controller using the server program in control
panel:
a. Minimize memory
b. Balance
c. Optimize for file sharing
d. Optimize for network applications
Answer: d
Did not get this question but here it is anyway:
Question: You have a Windows NT server with six scsi
disks. On one
disk is the system partition, the other five are in a
stripset with
parity. 1 disk fails, you replaced the disk. What must
be done next
in the disk administrator?
a. Choose extend volume set in the partition menu
b. Choose regenerate in the fault tolerance menu
c. Choose make stripe set with parity and restore from
backup
d. Do nothing, the disk will be regenerated when NT
boots
Answer: b
Question: You have a Windows NT server with six scsi
disks. On one
disk is the system partition, the other five are in a
stripset with
parity. 2 disks failed, you replaced the disks. What
must be done
next in the disk administrator?
a. Choose extend volume set in the partition menu
b. Choose regenerate in the fault tolerance menu
c. Choose make stripe set with parity and restore from
backup
d. Do nothing, the disk wil be regenerated when NT
boots
Answer: c
Question: You have the jobs to make new custom fault
tolerance
standard for your company. The company now uses disk
duplexing as the
current standard.
Required results:
Data integrity must be maintained when 1 disks
fails.
Optional results:
The fault tolerance methode must not use additional
processor time.
The read access time must be improved.
Proposed Solution:
Introduce a stripeset with parity as the new company
standard What does
the proposed solution produce?
a. The required result and the optional
results.
b. The required result and one of the optional
results.
c. The required result only.
d. Does not produce the required result or the
optional results.
Answer: b
Question: You are using network monitor from the Windows
NT server 4.0
standard installation. You have just captured 400
frames from your
NT server. How can you display data originating from
one specific
computer to your server.
a. use the address database
b. use capture filter by protocol
c. use capture filter by address
d. use sort by address in capture window
Answer: d
NEW questions I hadn't seen:
Question: You have 3 domains, SALES, ACCOUNTING and
RESEARCH. All users are spread throughout the 3 domains and all need
access to the SALES domain's resources.
a. let ACCT trust SALES and RESEARCH, make a full trust
between SALES and RESEARCH
b implement two one-way trusts where SALES trust ACCOUNTING and
SALES trusts RESEARCH.
c. let ACCT be on it's own, make a full trust between the SALES
and RESEARCH domain
d. implement a full trust
Answer: b
Question: Your company uses the single domain model.
Brokers with NT
workstation 4.0 notebooks need to have access to the
domain from remote
locations. Your job is to implement the highest level of
security on the domain.
Required results:
Brokers need access to the domain. Only the brokers may
log in and no
other users.
Brokers must be able to login from ANY location.
Optional results:
Passwords are transmitted encrypted over the line. All
data must be
transmitted encrypted.
Proposed solution:
Use a password length with a minimum of 8 characters.
Let the system
remember the last 10 used passwords. Force the brokers to
change their
password every month. Install a RAS server and configure
it with the RAS
manager so that only the brokers have permission to log
in. Use the
Microsoft authentication method and data
encryption.
NEW twist: Configure RAS so the server calls back at a pre-defined
number.
What does the proposed solution produce?
a. The required result and the optional
results.
b. The required result and one of the optional
results.
c. The required result only.
d. Does not produce the required result or the
optional results.
Answer: d
Question: Your company uses the single domain model.
Brokers with NT
workstation 4.0 notebooks need to have access to the
domain from remote
locations. Your job is to implement the highest level of
security on the domain.
Required results:
Brokers need access to the domain. Only the brokers may
log in and no
other users.
Optional result
s: Passwords are transmitted encrypted over the line. All
data must be
transmitted encrypted.
Proposed solution:
Use a password length with a minimum of 8 characters.
Let the system
remember the last 10 used passwords. Force the brokers to
change their
password every month. Install a RAS server and configure
it with the RAS
manager so that only the brokers have permission to log
in. Use any
authentication method. Use a hardware security host
between the RAS
modem and the RAS server.
What does the proposed solution produce?
a. The required result and the optional results.
b. The required result and one of the optional
results.
c. The required result only.
d. Does not produce the required result or the
optional results.
Answer: b
Question: You are using the migration tool to transfer user accounts to
a NT
server. What is a requirement in order to do
this.
a. the NETBEUI protocol must be installed on both the NT
server and theNetware
server
b. the Microsoft TCP/IP must be installed protocol on
both the NT server
and the Netware server
c. a windows NT server with a FAT partition
d. a windows NT server with a NTFS partition
Answer: d
Question: You have 3 NT servers and 3 Netware servers. You're
in the process of
migrating all users and data from the netware servers to the
NT servers. However
you don't want existing user or group accounts on the NT
domain to be overwritten.
What is the most efficient way to
accomplish this task?
a. start the migration with the default options
b. do the migration for each user separately by
hand.
c. do the migration, then delete the duplicate account with
the user manager
d. use a mapping file and enter the user, groups and
password manually.
Answer: d
Question: WWW service for 10 Companies. Every Co. with one registered
Domain
Name. Separate WEB for each on 1 NT Server with IIS. (Choose All)
a.Assign Multiple IP to network Adapter
b.Same IP to each co. Name on DNS.
c.Assign separate IP to each WWW folder
d.Wins to assign IP to NetBIOS name.
Answer: a,c
Question: To access resources on Servers in Domain Sales from NT
workstations.
User account in Workstation only. (Choose Two)
a.Enable Quest account
b.Duplicate user account in Sales for each NT Workstation
c.Make user Account of NT Workstation member of appropriate groups in
Sales
d.Create a duplicate group account for each group in NT Workstation.
Answer: a,b
Question: Install Server. No User account validation. Allow specific
user
account & groups from domain to use share resources.
a.As server that has joined Domain.
b.As a server that is a member of WKGroup
c.As a server with Server Service disabled.
d.As a BDC.
Answer: a..
Did not get this question but here it is anyway:
Question : PDC with 3BDC. 5000 clients. Wins Server. What should be the
mode
used ?
a.Minimised
b.Balance
c.Maximise for file
d.Maximise for Network
Answer: d
Question: Slow response on file & Print server. Suspect high
utilization on
one disk. What counter to be monitor ?
a.Logical Disk
b.Paging file
c.Sector counter for the thread.
d.Diskperf to analyse on per file basis.
Answer: a
Question: There are 80 computers on the network. Users belong to three
departments, and the users need to access all servers in all
departments.
Centralized user account administration is required. Which of the
following is
the best domain model for this network?
a.single domain
b. single master domain
c. multiple master domain
d. complete trust
Answer: a
Question:You are installing Windows NT Server 4.0 on a machine.
You want
the machine to be able to provide file and print resources to
members in a
domain called Corp, but you do not want it to authenticate user
logons. How
would you configure the computer?
a. as the PDC in the Corp domain
b. as a BDC in the Corp domain
c. as a member server in the Corp domain
d. as a member server in a workgroup
Answer: c
Here's a question that was slightly different on my test:
Question: You have got a Single Domain in MEXICO and one branch in
LONDON In
MEXICO you have got the PDC, BDC, WINS DHCP. In LONDON they have got
only a
Member Server. User of LONDON complains about the slow login and
browsing the
network.
required result:
You want LONDON to have the same logon validation time as in MEXICO.
optional results:
Less DHCP traffic
Less WINS traffic
Less synchronisation of the PCD and BDC
Less WINS synchronisation
Solution:
New twist: Reinstall servers as a BDC. (it did not specify for which
location but one can only assume it was for MEXICO… then again, you're
not supposed to assume anything ever.. tricky one!)
Install on that BDC DHCP and WINS
Change the pulse governor to 25
Change both WINS to be only PULL Partners.
What the propose solution do?
a.) the required result and all the optional results
b.) the required results an one optional result
c.) the required results an none of optional result
d.) does not produce the required result
Answer: a Unsure.
Question: You suspect numerous broadcasts are transmitted at a segment.
What program should you use to find out which station is causing this
traffic?
a. Performance Monitor
b. Windows NT Network Monitor
c. Server Manager
d. Response Probe
Answer: b
Question: You want to create a capacity-planning baseline of internal
resource
for your NT Server. Which tool you use?
a. Performance Monitor
b. Response Probe
c. Network Monitor
d. Excel
Answer: b
Question: How do you set up a filter in Network Monitor in order to show
traffic
generated from automatic IP adress assignement?
a. INCLUDE * ANY<-->BOOTP
b. PROTOCOL==DNS
c. PROTOCOL==WINS
d. PROTOCOL==DHCP
Answer: d
Question: Your server has multiple processors installed. Which object
should
be measured if you want only a single line in the graph of Performance
Monitor to represent all processes?
a. Processor Time of the thread object
b. Processor Time of the process object
c. Processor Time of the processor object
d. Total Processor Time of the System Object
Answer: d
Question: During printing checks your printer jammed. Checks can not be
reprinted as it would violate check. The printer is turned off and the
jam
cleared. How can you print your check again?
a. Resume from printer menu
b. Resume from document menu
c. Restart from document menu
d. Pause printer and restart again
Answer: c
Question: Since you added 7 BDCs to your network, network traffic due to
domain synchronization has increased.Î This is slowing down your
network. What should you do to remedy this problem?
a. Add more BDCs
b. Increase the value of the Pulse Concurrency settings
c. Increase the value of the Pulse setting
d. Change the Replicator Governor parameter
Answer: c
Question: You have a P133, 32MB, 2GB SCSI Disk configured as File &
Server . Your server has slow response time. Network Monitor shows
the following figures:
Object:Processor %Processor Time 88,1%
Object:Memory pages/sec 101,
Commited Bytes 84293
Object:Physical Disk %Disk time 100 %
What should be done:
a. Upgrade to a second processor
b. Upgrade to a faster processor
c. Upgrade memory to 64MB
d. Implement Raid5
Answer: c
Question: What is the cause of the Server stop In the Event viewer?
(Exhibit
showing a picture of the Event viewer with lots of STOP errors.)
a. NE2000 failed
b. Server service stopt
c. Cdrom failed
d. Netlogon failed
Answer: a (remember, the STOP error that occurred first is the one that
caused the problem and most likely also caused the other STOP errors.
NE2000 is the last one on the list but the first one to have occurred)
Question: You have used the option of making a system memory dump. How
do you extract informations from the memory dump file:
a. Debug.exe
b. Dumpcheck.exe
c. windbg.exe
d. Dumpexam.exe
Answer: d
Question: You have two domains, WEST and CORP. WEST trust CORP.
Somebody logs in the CORP domain via an NT workstation with an
account in the West domain. Which resources can be accessed?
a. All resources which the corp\Domain users group has
the right to access
b. All resources which the corp\Domain guests group has
the right to access
c. All resources which to the west\Domain users group has
the right to access
d. All resources which the west\Domain guests group has
the right to access
Answer: a
Question: You wish to configure your server so that itdoes not
participate in
the browsing elections. How?
a.Set the registry setting ChangeServerList = No
b.Set the registry setting MaintainServerList = No
c.Set the registry setting MaintainServerList = Auto
d.Set the registry setting ChangeServerList = Auto
Answer: b
Question: One of the servers is responding slowly. One of the disks
seems to
work very hard. What object are you going to monitor:
a. Physical disk
b. Logical Disk
c. Pages/sec
d. System
Answer: b
Question: You have a network with 3 domains East, West & Corp. User
accounts are centralised in Corp. users need to use their logon Scripts
anywhere in all three domains. where should the logon scripts be
located ?
a.C:\winnt\system32\repl\scripts
b.Netlogon in Corp
c.Netlogon on all three servers
d.Server path
Answer: b.. pretty sure.
Question: While installing NT server as a member server in Corp domain
you
get the message "Could not locate Primary Domain Controller for
CORP domain.
What do you do?
a.install the member Server in a workgroup and join the
domain later.
b. Install the memeber server as a PDC.
c. Install the server as a BDC in a workgroup and join the
domain later.
D. Stop installation
Answer: a
Question: You have a BDC in your domain whre you have installed an
Access
database. 300 users have access to the database software. How can
you configure the server for the best performance.
a. Minimize memory use
b. Balance
c. Maximize throughput for Network Application
d. Maximize throughput for File Sharing.
Answer: d
Question: You have installed a server with WWW service for 10 Companies.
Every Co. with one registered Domain Name. Separate WEB for each
on 1 NT Server with IIS. (Choose 2)
a.Assign Multiple IP to network Adapter.
b.Manually Assign separate IP to each WWW folder
c.Assign one IP adress in the DNS
d.Assign IP adresses through DHC
Answer: a,b
Question: You install windows NT server without creating ERD. You then
configure SCSI devices and Printers. You want to back up the
configuration settings so that you can quickly restore the computer in
the event of a startup Failure.
a.Save registry with the Nt backup
b.Create a ERD with current configuration settings using
rdisk.exe
c.Save key in the Registry Editor
d.Save configuration in Disk Administrator
Answer: b
Question: An NT server during power outage, the UPS connected to the
serverÎ failed. You disconnect the UPS.After reboot, the server cannot
go past blue screen, What action should you take FIRST?
(Here I picked up my second wrong answer)
a.Boot with Windows nt server boot disk
b.Reinstall NT
c.Perform emergency restore procedure
d.Restore from tape
Answer: a
Question: The system has crashed (from Registry, profile, or
configuration file
problems).Yoy have an ERD disk but do not have the three installation
boot disks. What do you do? ( Choose 2)
a.Create set up disks by Winnt.exe from CD
b.Boot with setup disks and restore Registry from ERD
c.Boot with ERD
d.Reinstall NT
Answer: a,b
Question: You have installed SQL server on NT. NetWare Client needs to
access that server. What do you have to install on the NT server?
a.NWLINk
b.CSNW
c.GSNW
d.FSNW
Answer: a
Question: You have migrated data from a Netware server to an NT server,
now your Netware clients are complaining that they cannot access the
data on the NT server. What do you need to load on the Netware
clients?
a.Microsoft Client foe Netware
b.Microsoft Redirector
c.GSNW
d.NwLink
Answer: b
Question: You have six scsi disks. The first disk contains the system
partition. The other five are configured as a stripe set with parity.
The second and third hard disks fail. You replace the failed disks. What
must be done next?
a.Recreate Stripe set with parity and restore user database using the
disks from the original installation.
b.Choose RegenerateÎStripe set and restore from tape backup
c.Recreate Stripe set with parity and restore user database from tape
backup
d.Do nothing.
Answer: c.. pretty sure.
Question: You want to combine the free disk space from six hard drives
into a
single logical drive.Î you want to achieve the fastest possible read &
Write performance. Which of the following Windows NT disk
management strategies would you implement?
a.Disk mirroring
b.Disk duplexing
c.Stripe set
d.Stripe set with parity
Answer: c
Question: You have four hard disks. The operating system is NT Server.
The
first disk contains the system and boot partitions. The remaining three
are disk-striped with parity and contains user files and data. The first
hard disk failed.Î What are the steps you must take?
a.reinstall Nt server on new HD and restore from tape
b.Reinstall NT Server on new HD and use the emergency
repair process to restore registry.
c.reinstall NT and recreate all user accounts and passwords.
d.Boot NT and regenerate Data
Answer: a not sure
Question: Domains, West & East. West trust East. Guest account on both
domain removed. Everyone special group removed. A user logon to
West. What should be done for him to access resources on East.
a.Access permission to East/Domain User
b.Access permission to West/Domain User
c.Member of West/Domain
d.User cannot access resources on East
Answer: d
Question: Domains Sales and Corp. Sales trust Corp. Maria is a member of
Global Group Budget in Corp. There is a Marketing Server inside
Sales. Inside Sales there is Shared directory named Forecast. The
Corp\Budget group has been assigned with Read permission for
Forecast. Maria tried to access Forecast but denied.What is the
problem?
a. Share permissions are overrding NTFS permissions
b.Make Corp trust Sales
c.Create account for Maria in Sales
d. Global groups cannot be assigned permissions to resources in other
domains
Answer: a pretty sure.
Question: Sales and Accounting trusts Corp. How do you give all users
the right to
add a computer account into domain.
Answer: Give Corp/domain user rights :Add computer into domain on
all 3 domain controllers. (something to that effect)
Question: You have Subnet A and B. Subnet A has a DHCP Server. What
should you do to let subnet b use the same DHCP server?
a. Install DHCP Relay Agent
b. Install RIP for IP
c. Install Wins
d. Install DNS
Answer: a
Question: A question about Wins and DNS with complicated with several
answers. Basically it tests if you know what WINS and DNS does.
Answer: WINS resolves Netbios names to computer IP adresses and DNS
resolves host names to IP addresses
Question: Multiple exhibit about a user who had READ permissions an on a
directory and READ permissions through a group that she belonged
to.
What can she effectively do?
I chose the obvious answer of READ.