Just passed 966/1000 for Windows NT Server 4.0 30 questions Study sites: http://www.mcseguide.com/ (*excellent site*);
http://209.207.167.177/ (BrainDump Heaven); http://Cramsession.com/

Study Exams: Transcender Exams, TestMaster [get it at http://www.mcseguide.com/testmaster/testmaster.htm, Pep Exam.

Study Books: MCSE: The Core Exams in a Nutshell, by Oreilly; Microsoft(r) Certified Systems Engineer Core Requirements Training Kit (ISBN 1-57231-905-4).

THANK YOU ALL FOR POSTING YOUR EXAM INFO!!!!!!!!! I picked through some of the questions I studied and saw on the exam with and copied them here. They are questions OTHERS posted and are very near to what I had. It is important to know the CONCEPTS not just the answers to the questions. Netware was hit the most.

Partially remembered questions:

You move a subdirectory to a another subdirectory on the same NTFS partition. What will the effect Permissions be?
[Same as the original]

You want to create a new partition ....before you can format the drive you must?
a) choose mark active from the Partition menu
b) choose Commit Change Now from the Partition menu
c) assign a volume label
d) Etc...
[B]

Complete questions:

You want to install NT Server from your CD-ROM. How can you do this? (choose all that apply)
a) Boot from CD-ROM, Run Setup.exe
b) Boot from MSDOS, verify CD-ROM drivers and Run winnt.exe /b from CD-ROM
c) Boot from Boot from MSDOS, verify CD-ROM drivers and Run setup.exe from CD-ROM
d) Boot from MSDOS, verify CD-ROM drivers and run winnt32.exe /b from CD-ROM
e) Boot from Setup boot disks
[B&E]

You have an NT based network with 2 NetWare servers and an NT Server running GSNW. What must be in the pathname so that the clients in the network can access resources on the NetWare servers? (choose the best answer)
a) Server names of both NetWare servers
b) UNC path with the name of a NetWare server and the name of a volume on that server
c) UNC path with the name of the NT Server running GSNW
d) An existing folder on the NT Server running GSNW
[Not sure I answered C]

You have a network with 50 workstation which access resources on a local server and a remote server. The workstations use TCP/IP to connect to the remote server and NetBEUI to connect to the local server. 90% of accessed resources are on the local server and 10% are on the remote server. How should you configure protocol bindings to optimize access to resources?
(choose the best answer)
a)Arrange the binding order on the local server so that NetBEUI is on top and TCP/IP is second; arrange the binding order on the remote server so that TCP/IP is on top and NetBEUI is second.
b) Arrange the binding order on all workstations so that TCP/IP is on top and NetBEUI is second for Server services
c) Arrange the binding order on all workstations so that TCP/IP is on top and NetBEUI is second for Workstation services
d) Arrange the binding order on all workstations so that NetBEUI is on top and TCP/IP is second for Server services
e) Arrange the binding order on all workstations so that NetBEUI is on top and TCP/IP is second for Workstation services
f) Binding order has no bearing on network access performance
[E]

You have a network with 2 NetWare servers, 30 MSDOS clients and 20 NT Workstation clients. All clients are using NetWare client software. You add an NT Server machine to the network and it will be used for NetBIOS based client/server applications. What software is needed so that the clients can access the applications on the NT Server?
(choose the best answer)
a)CSNW
b) NWLink
c) GSNW
d) RIP for NWLink
[B]

You have a network with one NT Server and 100 NT Workstation computers. The network uses the TCP/IP protocol. The NT Server has two network adapter cards, each attached to a separate LAN segment. You want the server to act as a router between the segments. How should you configure the IP address for the network adapter cards? (choose the best answer)
a) Manually assign a unique IP address for each card
b) Manually assign identical IP addresses for each card
c) Use DHCP to automatically assign unique IP addresses for each card
d) Use DHCP to automatically assign identical IP addresses for each card
[A]

Where should you place files so that they will be replicated to the target NT Server as shown in the Exhibit below?

(The exhibit is a GUI or picture of the Directory Replication dialogue box)

a) Any subdirectory of the Winnt/system32/Repl/Import directory
b) Any subdirectory of the Winnt/system32/Repl/Export directory
c) Anywhere in the Winnt/system32/Repl/Import directory
d) Anywhere in the Winnt/system32/Repl/Export directory
[B they HAVE TO be in a SUBDIRECTORY]

You want to install Windows NT Server on your MSDOS computer but you want to be sure the hardware is compatible with the operating system. What is the best way to do this?
(choose all that apply)
a) Check the HCL on the CD-ROM
b) Install and run Windows NT Diagnostics
c) During installation, choose to "Check Hardware for Compatibility" option
d) Run the NTHQ utility at the command prompt
[A&D]

You have a network with 100 Windows NT 3.51 clients. You install 3 NT Server computers to the network to be used as print servers. What must you do to enable the clients to print to these servers?
(choose all that apply)
a) Install the 3.51 print drivers on each of the print servers
b) Map a network drive from each client computer to the new printer servers
c) On each client computer, create a share name for each of the printers
d) On each print server, create a client account for each client with the appropriate printer permissions
[A&?]

You connect to a RAS server from your Windows 95 computer using third party PPP software which supports only DES algorithm encryption for logon authentication. What is the highest level of encryption you can configure your RAS server to require?
a)Microsoft encrypted authentication
b) Any authentication including clear text
c) Data encryption
d) Require Encrypted Authentication
[D]

How can you backup the local registry files and user account information?
a) Using Windows NT Backup
b)....
c)....
[Always NT backup]

RAS clients complain that they are being disconnected immediately upon connecting to the server. What can you use to diagnose the problem?
a) Use the Registry editor to enable the device.log
b) Performance Monitor
c) Network Monitor
d) Remote Access Administrator-view port status
[A]

You suspect that a bottleneck has formed on a physical disk on a client's computer. You set the Performance Monitor on your workstation to monitor disk queue length and % disk time for the physical disk that you suspect has the problem. When you go to view the statistics, you have no data. You know data is being written...?
a) You must enable Performance Monitor on the computer where the monitored disk resides
b) Install Network Monitor Agent
c) Create some activity on the disk to generate data
d) Enter diskperf -y at the command prompt
[D]

THANKS AGAIN TO ALL AND GOOD LUCK TO ALL EXAMINEES!