1.. How do you start the command "ntbackup /r/e" minimize and low priority?
my answer: start /min /low ntbackup /r/e
2. The computer is running NT 3.51 workstation on an HPFS partition.
You would like to upgrade to windows nt4 wks
How should you proceed?
my aswer: convert to NTFS then upgrade to windows nt4.0
3.What do you need to print to a TCP/IP printer?
--IP address & printer name
4.How can you dial into a RAS with 3 modems using multilink and
callback security.
--cannot do, doesnt work
5.-What do you do if a document is jammed in a printer and
was damaged to
reprint?
--restart from the document
6.You are installing a MIDI device, which control panel applet do
you use?
A. Multimedia menu
7.A system policy is implemented to a group, yet 3 users of the
group do not receive the policy - why?
A. Because they have individual policies which have priority.
8.Which two utilities can you use to monitor memory utilisation?
A. Task Manager and Performance monitor
9.How do you change a password on a Netware Server (chooise 2)?
A. Use setpass and CTRL-ALT-DELETE
10.The default memory for 16 bit windows applications is what?
A. separet and Shared
11.-You wish to install FTP server, what else must you install\
Microsoft Peer Web service
12.-Though you are installing Windows NT Workstation without a Network
Interface Card (which will arrive later), you still want to have network
protocols installed and configured in advance. Answer: select loop-back
adapter and bind protocols to it
13.Situation (Long): You are planing to reconfigure an NT Workstation with
32 MB RAM for optimum speed of access to its local (mainly graphic data)
files for other computers in the same LAN. You have there a SCSI controller
with 4 disks of 2 GB each. You
Required result: To optimize performance for optimum speed of access to
local data files.
Optional results: Reconfigure for optimum speed of access to paging file.
Optimize network access performance.
Proposed solution:
Configure the first hard disk as boot partition. Configure the other 3 disks
as a strip Set. Use NTFS on all partitions. Place data on the strip Set.
Place paging file strip Set. Configure order of protocols at bottom
The solution produces:
[ ] The required result and 2 of the optional results.
[ x] The required result and 1 of the optional results.
[ ] The required result and none of the optional results.
[ ] None of the required results.
14.Having an NT Workstation 3.51 Intel 386 33 MHz CPU 16 MB RAM, you want to
upgrade it to NT Workstation 4.0 with the same settings as in the3.51
version. What to do? Answer: you cannot upgrade it, you need at least an
Intel 486 to do it
15.You are the administrator of a Windows NT Workstation computer that
is used by three people. The users work different shifts in a facility
that handles confidential information. The users want to maintain the
security of their own files. They also want to customize their won
Windows NT Workstation desktop environment, including screen colors and
program groups. Which three steps must you take?
A:Create a user account for each user. Create a home directory for each
user on a NTFS partition. Ensure the directory permission are
configured so that users have exclusive access to their own home
directory.
1. Which takes precedence, system policy or roaming user profile?
Note. Policy over profiles
User policy over system policy
Machine policy over all.
2. How do you start the command "ntbackup /r /e" with low priority?
A. start /low ntbackup /r /e
3. What two things do you need to print to a TCP/IP printer on a network?
Answer:
A. IP address and printer name.
4. Client service for Netware :
a. allow Netware client to use share directory and printer on NT Workstation.
b. connect volumes or directory on Netware.
c. connect printer queues on Netware.
d. connect Netware 4.1 volume on server that do not run bindery emulation.
e. Run Netware 3.1 syscon utility from NTWS.
f. Run login script on netware server
g. Function as gateway to NTWS for them NTWS that do not have CSNW installed.
Ans : b,c,d, e,f
5. Computer has 2 ISDN adapters installed. Each adapter has 2 B-Channels that can be used with Dial-Up Networking to connect to your company's RAS Server. RAS Server also has 2 ISDN adapters. Each B-Channel has its own phone number. How do you configure and use Dial-Up Networking's Multi-Link option to use all four channels when you connect to the RAS Server?
A. Create a phonebook entry for each ISDN B-Channel. Connect to RAS Server using all four entries.
B. Create one phonebook entry that has the four phone numbers. Connect to RAS Server by using this entry.
C. Create one phonebook entry for each ISDN adapter. Connect to RAS Server by using both entries.
D. Create one phonebook entry that is configured to use multiple lines. Assign a phone number to each line. Connect to RAS Server by using this entry
Ans: B
6. You install CSNW on Workstation computer. What are the 2 different ways to change password for your Netware 4.x user account from Windows NT Workstation computer?
(Choose two)
A. Choose Network from Control Panel.
B. Use Netware Setpass Utility at Command Prompt.
C. At Command Prompt, type the following command: net password.
D. Press Ctrl+Alt+Del and click Change Password in Windows NT Security Dialog box.
Ans D & B
7. You have several DOS program you want to run under NT. You need to run a TSR that controls the COM port for these DOS program. How do you run MS-DOS the Terminate and Stay Resident (TSR) application?
A Start it in its own NTVDM
B Start it in the default NTVDM
C Start it using Config.nt
D Start it using Autoexec.nt
Answer: B
8. Question about Nt utilities for statistics:
Task Manager
9. You need to install MIDI device? In which box?
10. You are the administrator of a Windows NT Workstation computer that is used by three people.The users work different shifts in a facility that handles confidential information. The users want to maintain the security of their own files. They also want to customize their won Windows NT Workstation desktop environment, including screen colors and program groups. Which three steps must you take?
Ans.: Create a user account for each user.Create a home directory for each user on a NTFS partition. Ensure the directory permission are configured so that users have exclusive access to their own home directory.
11. Situation (Long): You are planing to reconfigure an NT Workstation with 32 MB RAM for optimum speed of access to its local (mainly graphic data) files, varying in size from 1MB to 10MB, for other computers in the same LAN. You have there a SCSI controller with 4 disks of 2 GB each,formatted with FAT.
Required result: To optimize performance for optimum speed of access to local data files.
Optional results: Reconfigure for optimum speed of access to paging file.
Optimize network access performance.
Proposed solution:Configure the first hard disk as boot partition. Configure the other 3 disks as a Volume Set. Use FAT on all partitions. Place data on the Volume Set. Place paging file on the boot partition. Configure binding order of protocols; move most used protocols to the bottom of binding order.
The solution produces:
A The required result and 2 of the optional results.
B The required result and 1 of the optional results.
C The required result and none of the optional results.
D None of the required results.
Note: Volume sets DO NOT speed up disk access.
Answer: D
12. You want to monitor attemps of printing. You set the security in printer. And what else should you do ?
13. You use performance monitor and see your processor is running at 92% and you have excess paging. What would be the best way forward to address the issue?
a) Add another processor
b) Add more RAM
c) Increase the size of the page file
Ans: B
14. Your network dose not use TCP/IP protocol. Which Protocol do you need to print to a HP printer ?
A IP-address
B NetBEUI
C DLC
D Default gateway
Answer: C
15. You make a NT Boot disk which can use on your computer without problems. But it cannot be used On John’s Computer.
A. Edit the Boot.ini file on the disk to change the ARC naming