x'treme overclocker

I had a celelron 366 OEM from malaysia code sl36c.As you known that it is a great one other than 300a.It's work great at 550 ,2.0 volts.But I want more than this.I use Asus slotket to put it to my Bx6 2.0 mobo and big heatsink and 6 mm fan which can't put through 112 FSB.I though that because of heat production. A guy told me that the secret of asustek slotket is behind the plastic that covering it's edge.So I remove it then I see 3 holes on each side that give change to me for attach lage heatsink or either sandwich it.

As you see there is one central hole on each side.All I had to do is to drill a hole on my heatsink and attach it with nut.This can give me to 616@2.2 volts but the system was not stable.Every time it locked up I noticed that the slocket was too hot too.So I decide too sandwich it .But I see that the rear side of slotket has many small pin that prevent me to sandwich it.So I use a copper plate as a spacer after tape the surface with thermal tape.It's work great at 616 Mhz.Then I try it at 643 Mhz ,it didn't work even at 2.4 volts.Then I add a peltier 40*40mm 36 Watt in the front that give me chage to reach 643 with ocassional lock up.

I had heart a lot about water cooler.So I try to made it one.I used a stainless steel as a water jacket although It's conductivity is worse than cooper but I should made it soon.

I designed my water jacket with one wing on each side and drill a hole on it to match the slotket.I used 2 peltiers 36 watts each and a cool plate.The siize of cool plate was equal to the 2 peltiers.In the rear side of the slotket I used AVVID heatsink and a fan.So I had a sandwich with 2 peltiers water cooler in front and a heatsink in the rear.

All I had to do is put it in the system and try that was it worked? It was surpricing as the cool plate was cool to icy.I can put the chip to run at 124 Mhz FSB.Yehh it at 683 Mhz.It's so fast for me.And it made me so glad because of It was a home made water cooler.

Sorry for the picture,it is so suck.As you can see is the icy around the cool plate.I can run my system at 683 Mhz,2.4 volts with my L2 off.L2 cach cause my system locked up since 643 Mhz. Then I try at 129 FSB.It work but not stable to run brenchmark or game.The below is my brenchmark from sandra sisoft and cpuid at 708 Mhz!

 

My system

cpu : intel celeron 366 sl36c OEM week 22

mobo: Abit Bx6 2.0

harddisk: Samsung 2.1 Gb

ram : winbond pc 133 ,128 Mbs.

vga :TNT2 32 Mbs 64 m

sound card : creative live value

cdrom :creative 24 x

power supply 250 Watts *II ;ATX and AT


FastCounter by LinkExchange

 


 

 

1