# File generated by XConfigurator. #
********************************************************************** #
Refer to the XF86Config(4/5) man page for details about the format of # this
file. #
********************************************************************** #
********************************************************************** #
Files section. This allows default font and rgb paths to be set #
**********************************************************************
Section "Files" # The location of the RGB database. Note, this is the name
of the # file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple
FontPath entries are allowed (they are concatenated together) FontPath
"/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" # FontPath "/win/windows/fonts/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection #
********************************************************************** #
Server flags section. #
**********************************************************************
Section "ServerFlags" # Uncomment this to cause a core dump at the spot
where a signal is # received. This may leave the console in an unusable
state, but may # provide a better stack trace in the core dump to aid in
debugging #NoTrapSignals # Uncomment this to disable the server abort
sequence # This allows clients to receive this key event. #DontZap #
Uncomment this to disable the / mode switching # sequences. This allows
clients to receive these key events. #DontZoom EndSection #
********************************************************************** #
Input devices #
********************************************************************** #
********************************************************************** #
Keyboard section #
**********************************************************************
Section "Keyboard" Protocol "Standard" # when using XQUEUE, comment out the
above line, and uncomment the # following line #Protocol "Xqueue" AutoRepeat
500 5 # Let the server do the NumLock processing. This should only be #
required when using pre-R6 clients #ServerNumLock # Specify which keyboard
LEDs can be user-controlled (eg, with xset(1)) #Xleds 1 2 3 #To set the
LeftAlt to Meta, RightAlt key to ModeShift, #RightCtl key to Compose, and
ScrollLock key to ModeLock: LeftAlt Meta RightAlt Meta ScrollLock Compose
RightCtl Control # To disable the XKEYBOARD extension, uncomment XkbDisable.
# XkbDisable # To customise the XKB settings to suit your keyboard, modify
the # lines below (which are the defaults). For example, for a non-U.S. #
keyboard, you will probably want to use: # XkbModel "pc102" # If you have a
US Microsoft Natural keyboard, you can use: # XkbModel "microsoft" # # Then
to change the language, change the Layout setting. # For example, a german
layout can be obtained with: # XkbLayout "de" # or: # XkbLayout "de" #
XkbVariant "nodeadkeys" # # If you'd like to switch the positions of your
capslock and # control keys, use: # XkbOptions "ctrl:swapcaps" # These are
the default XKB settings for XFree86 # XkbRules "xfree86" # XkbModel "pc101"
# XkbLayout "us" # XkbVariant "" # XkbOptions "" XkbDisable # XkbKeymap
"xfree86(us_intl)" EndSection #
********************************************************************** #
Pointer section #
**********************************************************************
Section "Pointer" Protocol "Microsoft" Device "/dev/mouse" # When using
XQUEUE, comment out the above two lines, and uncomment # the following line.
# Protocol "Xqueue" # Baudrate and SampleRate are only for some Logitech
mice # BaudRate 9600 # SampleRate 150 # Emulate3Buttons is an option for
2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds
(default is 50ms) Emulate3Buttons Emulate3Timeout 50 # ChordMiddle is an
option for some 3-button Logitech mice # ChordMiddle EndSection #
********************************************************************** #
Monitor section #
********************************************************************** # Any
number of monitor sections may be present Section "Monitor" Identifier "LCD
Panel 1024x768" VendorName "Unknown" ModelName "Unknown" # HorizSync is in
kHz unless units are specified. # HorizSync may be a comma separated list of
discrete values, or a # comma separated list of ranges of values. # NOTE:
THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR
THE CORRECT NUMBERS. HorizSync 31.5-80 # VertRefresh is in Hz unless units
are specified. # VertRefresh may be a comma separated list of discrete
values, or a # comma separated list of ranges of values. # NOTE: THE VALUES
HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE
CORRECT NUMBERS. VertRefresh 40-150 # Modes can be specified in two formats.
A compact one-line format, or # a multi-line format. # These two are
equivalent # ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817
Interlace # Mode "1024x768i" # DotClock 45 # HTimings 1024 1048 1208 1264 #
VTimings 768 776 784 817 # Flags "Interlace" # EndMode # This is a set of
standard mode timings. Modes that are out of monitor spec # are
automatically deleted by the server (provided the HorizSync and #
VertRefresh lines are correct), so there's no immediate need to # delete
mode timings (unless particular mode timings don't work on your # monitor).
With these modes, the best standard mode that your monitor # and video card
can support for a given resolution is automatically # used. ModeLine
"800x600" 36 800 824 896 1024 600 601 603 625 Modeline "1024x768" 40 1024
1048 1208 1264 768 776 784 817 Interlace EndSection #
********************************************************************** #
Graphics device section #
********************************************************************** # Any
number of graphics device sections may be present Section "Device"
Identifier "Generic VGA" VendorName "Unknown" BoardName "Unknown" Chipset
"generic" # VideoRam 256 # Clocks 25.2 28.3 EndSection # Device configured
by Xconfigurator: Section "Device" Identifier "My Video Card" VendorName
"Unknown" BoardName "Unknown" #VideoRam 4096 # Insert Clocks lines here if
appropriate EndSection #
********************************************************************** #
Screen sections #
********************************************************************** # The
Colour SVGA server Section "Screen" Driver "svga" # Use Device "Generic VGA"
for Standard VGA 320x200x256 #Device "Generic VGA" Device "My Video Card"
Monitor "LCD Panel 1024x768" Subsection "Display" Depth 16 Modes "1024x768"
ViewPort 0 0 #Virtual 1024 768 EndSubsection EndSection # The 16-color VGA
server Section "Screen" Driver "vga16" Device "Generic VGA" Monitor "LCD
Panel 1024x768" Subsection "Display" Modes "640x480" "800x600" ViewPort 0 0
#Virtual 800 600 EndSubsection EndSection # The Mono server Section "Screen"
Driver "vga2" Device "Generic VGA" Monitor "LCD Panel 1024x768" Subsection
"Display" Modes "640x480" "800x600" ViewPort 0 0 #Virtual 800 600
EndSubsection EndSection # The accelerated servers (S3, Mach32, Mach8, 8514,
P9000, AGX, W32, Mach64 # I128, and S3V) Section "Screen" Driver "accel"
Device "My Video Card" Monitor "LCD Panel 1024x768" Subsection "Display"
Depth 16 Modes "1024x768" ViewPort 0 0 #Virtual 1024 768 EndSubsection
EndSection