The RR-15 and
RR-15-PLUS feature two slide-out, swiveling light fixtures to provide discreet
illumination of your equipment on stages, in studios, and in other dark places.
A dimmer knob lets you adjust the lamp brightness to just the right level. The
RR-15-PLUS adds a bright red, three digit LED meter that displays incoming AC
line voltage. The RR-15NL is designed for applications where lights are not
required, and offers the same protection for your equipment.
All RR Series conditioners protect your delicate electronic equipment by
combining high voltage varistor (MOV) surge and transient suppressors. The
fast-acting suppression circuit quickly responds to clamp transient voltages to
safe levels.An RFI/EMI interference filter works to prevent noise from
fluorescent lights, certain dimmers, radio transmitters, and similar sources of
"electronic pollution" from contaminating the AC line and from there,
leaking into sensitive audio, video, or computer circuits. The RR-15 and RR-15NL
are NRTL/TUV listed.
For safety, a
circuit breaker is provided on the rear panel. If the total load on the Power
Conditioner (combining all outlets) exceeds the 15A (or 1800 watt limit), the
circuit breaker will trip. If this happens, it may be easily reset by pushing in
the button. There is no need to replace fuses.
For convenience in
travelling, the lamps (if present) may be pushed in, safely out of the way. When
the rack is again ready to use, they pull out easily (up to 2.75 inches, or 7
cm) and may be rotated and aimed to provide optimum illumination for your
equipment. They come supplied with 7 watt night-light bulbs. Cooler-running 4
watt bulbs or even colored Christmas tree bulbs may be substituted if desired.
Replacements are readily available at most hardware stores or almost anywhere
household light bulbs are sold, and can be ordered from Furman. Bulbs are easily
replaced without removing the unit from the rack by unscrewing the cap on the
end of each light tube.
All models have a convenient master switch for the rear outlets which glows when the power is on. In models with lighting, there is a separate "Rack Lights" switch for the lamps, plus a dimmer control knob which increases the lamps' brightness.
