­TÃfAnfy Water - Copyright (C) by Fabio Ciucci 1997/98


This applet can simulate water wavings over any GIF or JPG image.This applet
is fully parametrized, so you can generate all many variations of water
wavings.

The animation fish.gif is a courtesy of Paolo Sioli / Digibit.

The following 3 ".class" files must be uploaded: AnWater.class, Lware.class
and anfy class.

Insert the <applet> tag in your html document as follows to add this applet
to your page (Comments after the ";" symbol are code explanations and
acceptable min/max values. They are not part of the applet language):

<applet code="AnWater.class" width=150 height=132> ; Name, Width, Height
<param name=credits value="Applet by Fabio Ciucci (www.anfyjava.com)">
<param name=regcode value="NO">         ; Registration code (if you have it)
<param name=reglink value="NO">         ; Optional URL link when applet
                                          is "clicked".
<param name=regnewframe value="YES">       ; Reglink opened in new frame?
<param name=regframename value="_blank">   ; Name of new frame for reglink
<param name=statusmsg value="Water applet">; Statusbar message
<param name=image value="imfad1.gif">      ; Image to load
<param name=res value="1">                 ; resolution (1 .. 8)
<param name=light value="YES">             ; Light effects ("YES" or "NO")
<param name=minlight value="0">            ; Lowest light (-255 .. 255)
<param name=maxlight value="100">          ; Highest light (-255 .. 255)
<param name=autodesign value="YES">        ; Auto design ("YES" or "NO")
<param name=density value="4">             ; Density of fluid (2 .. 6)
<param name=fishnum value="0">             ; Number of fishes (0 .. 2)
<param name=cross value="NO">              ; Cross effect ("YES" or "NO")
<param name=crossfactor value="30">        ; Factor of cross effect
<param name=rainsize value="0">            ; Size of circular rain (0 = OFF)
<param name=rainfactor value="10">         ; Circular rain factor
<param name=srainsize value="0">           ; Size of square rain (0 = OFF)
<param name=srainfactor value="10">        ; Square rain factor
<param name=fixdrop value="NO">            ; Fixed drops ("YES" or "NO")
<param name=fixdropX value="0">            ; X coord of fixed drops
<param name=fixdropY value="0">            ; Y coord of fixed drops
<param name=fixdropS value="0">            ; Size of fixed drops
<param name=fixdropF value="0">            ; Factor of fixed drops
<param name=pressure value="400">          ; Rain pressure (1 .. 2000)
<param name=fluidmode value="water">       ; Fluidity ("water" or "oil")
<param name=interactive value="YES">       ; Interaction ("ON" .. "OFF")
<param name=overimg value="NO">            ; Optional image over applet
<param name=overimgX value="0">            ; Over image X offset
<param name=overimgY value="0">            ; Over image Y offset
<param name=memdelay value="1000">         ; Memory deallocation delay
<param name=priority value="3">            ; Task priority (1..10)
<param name=MinSYNC value="10">            ; Min. milliseconds/frame for sync
Sorry, your browser doesn't support Java.  ; Message for no java browsers.
</applet>                                  ; End of applet tag

                             ---------


The following instructions detail how to change parameters:

The images (GIF and/or JPG) can be of any size, but all image dimensions must
be identical.

Attempting to change the credits parameter will disable the applet.
To activate the reg parameters read the shareware registration notes.
In the "regcode" parameter, place the registration code you
purchased from the author. If the code is correct and the applet is run from
the registered domain name, you can use "link" parameters to link to a URL
when the applet is "clicked".

If you set "regnewframe" to "YES", you can specify a specific frame location
for the reglink:

"_blank"  : To load the link in a new blank unnamed browser window.
"_self"   : To load the link into the same window the applet occupies.
"_parent" : To load the link into the immediate FRAMESET parent.
"_top"    : To load the link into the top body of the window.

You can also set a custom frame name, such as "myframe1".

With the "overimg" parameter you can specify the name of an image that will
be painted over the applet. The best options are transparent GIF images.
NOTE: Animated GIF images are supported, but will be displayed as animated
only on latest browsers (Netscape 4 and Explorer 4 or newer).
With "overimgX" and "overimgY" you can center the image over the applet area.

The GIF/JPG image can be of any size. If res=1, remember to place the exact
size of image in "width" and "height" tags. If res=2, place double values,
if res=3 triple values etc.
(In fact, res is a sort of zoomer).

You can enable or disable the light shade calculation with "light" parameter.
The effect without light calculations is faster, but less realistic.
When light is enabled setting it to "YES", you can even choose the light
and shadow intensity,  with "minlight" and "maxlight" parameters, who
can accept values randing from -255 to 255.

If you set to "YES" the "autodesign" parameter, an automatic slideshow of the
effects will be executed, and the next parameters are ignored.

If you set to "NO" the autodesign, you have to configure effects manually:

The "density" parameter (2 .. 6) controls the density if fluid. Lower values
mean more fluid liquid, so waves end quickly. Higher values cause a slower
decadence of the waves.

You can insert up to 2 fishes, with "fishnum" parameter.

Other effects are: cross, rain and srain.

Set the parameter "cross" to YES to activate this strange effect.
The "crossfactor" parameter works as "timer" between one cross and another.
By setting "crossfactor" to 0, a new cross will appear every frame.
Higher values mean more distance between one cross and another.

The "rainsize" will determine a circular rain. If it is set to zero= no
rain. Values higher or equal to 1 will generate rain.
To control it use "rainfactor" as seen for "crossfactor".

The "srainsize" and "srainfactor" parameters work the same as "rainsize" and
"rainfactor", but generate square rain.

You can enable more than one effect at the same time.

Another option is to enable the "fixdrop" parameter setting it to "YES",
it will generate drops only at the fixed X and Y positions specified
with the "fixdropX" and "fixdropY" parameters.
The size and frequency of these drops are determined by the parameters
named "fixdropS" and "fixdropF".

You can control the rain drops strenght with the "pressure" parameter,
with values from 1 to 2000.

The fluidity can be fluid or less fluid: setting the "fluidmode" parameter
to "water" will enable the water mode, otherwise set it to "oil" for a
more intense liquid.

Setting the "interactive" parameter to "YES", will enable mouse pointer
to generate waves when it's moved over the applet area by the user.