DUN not installed properly

• Connection is Corrupted
• The program you are using (e.g. a dialer) that uses DUN is corrupted
• Well simply, DUN was never installed! (or Uninstalled)

Connection is Corrupted

• My Computer, Dial-Up Networking, Right-Click on the Connection and then select Delete (before doing this you might want to go through the properties, and make sure that you have all the information, you may need to create a new connection after you delete the current one)

Dialer is Corrupted: (easiest to check)

• Open My Computer,  Open Dial-Up Networking, Open the Connection for your *ISP and click on Connect if you get the same error, continue with DUN is not installed

DUN is not installed/Un/Re-installing DUN:

1. Get your Windows CD or *Find the win*.cab files (look below Get Paid To Surf to learn how to find)
2. Next: Click on Start, Settings, Control Panel. Open the Icon labeled Add Remove Programs
3. Click the tab Windows Setup (windows 98 will load the settings)
4. Highlight Communications and select Details
5. Make sure DUN is checked! (usually the first item ) (go to 6 if not) if so, Uncheck it and click on OK (it might say that it is needed by other components, write those down and you can install them later in the next step) when back at the main section that has Communications click on Apply (go to 7)
6. If it wasn't checked then Check it! click on OK, then Apply (go to 8)
7. When it is done, highlight Communications select Details and Check DUN (and other components as well) click OK, Apply
8. Click on OK (last time in add remove prgms) Click OK for the msg "You will need to restart when add remove prgms is complete" basically after that is done, you will want to
9. Click on Start, Shut Down, Restart
10. And we are done, Try again. If that doesn't work, you might just want to try calling your *ISP because I'm sure they will have more information then can be found here.