back GaRoute Home page

I wrote three useful Macro5 macros

You can find here both source (.opl) and Macro (.opo) files.

macro5.gif (8816 bytes)

Note that you can NOT run these .opo files straight from the system. You must download Macro 5, From Pascal, and run the macros from within his menu.

GPSsend is started from Street'99 or Route Planner. You must be in "cross-hair"mode (press Enter to get in that mode, so that you see a cross-hair cursor. GPSsend will
create an overlay file (AAAAA.OVR)
create an waypoint in this overlay,
switch to GaRoute
Read the just created AAAAA.OVR
Upload the waypoint to you Garmin.
Switch back to Street'99 or Route Planner.

 

GPStoggle can be used to switch of the GPS following in Street 99 or RoutePlanner. This will free the serial link for Waypoint transfer by GaRoute.

 

Replan will replan a route from your current position. Best used "on the Route" to see how far and how long you have to go.

Download the macros through the Software page.  

1