Motocross

Make that R/C paint job last a little bit longer?
Spread a small amount of Shoe-Goo on the  inside of the body it helps keep the body and paint from chipping. You will want to apply a little more where the shock towers are at (Front and  Rear) and fill any creases along the body lines.
Hint: Do not apply Shoe-Goo to a freshly painted body for at least 24 hours after the cover coat is sprayed. Shoe-Goo can sometimes smear the cover coating  if it has not set for at least 24 hours.

Are you tired of that dull look on the car and truck bodies?
Just spray on some Pledge Furniture Polish let it sit a few minutes and it will bring out the shine.

Are you tired of your body holes cracking and ripping?
RPM makes body savers that keep your body looking neat.  Dan's RC products also makes a body saver that sticks to the lexan and has a cut out that is the same size as the body hole.

Can't find the body post holes?
Most bodies have at least  one  hole that is marked or  indented in the lexan.  Most of the time the rear hole is marked so drill the rear hole  first.  After drilling the rear hole get a felt tip marker and rub some  ink on the front posts.  When you set the body down the ink from the  marker will leave a mark on the body.