PROJECTS

Causes of Damage of Stekel Mill Drums during Hot Rolling of Steel Slab

Cereblak Release Coatings for Aluminum Die Casting

Characterization of Aluminum foam prepared by Casting Process

Characterization of Dross from a Sidewell Melter Producing 3004 and 3105 Aluminum from Undercoated Scrap

Characterization of Precipitation in In-Line Annealed Aluminum Alloys

Coating of Temperature Sensors for Solder Resistance

Determination of the Mechanism Leading to the Formation of Surface Irregularities on Nitrided, Hot-Isostaticallly-Pressed Nb-50 wt % Ti-20 wt % W Alloy Compacts

Development of a Process to Hermetically Seal a Thermal Sensor Using a Vitreous Sealing Glass

Development of Hot Rolling Fabrication Parameters for Aluminum Boron Carbide Metal Matrix Composite Materials

Development of Welding Process to Join Aluminum Alloy Sheets Coil to Coil

Effect of Processing/Microstructure on the Corrosion Polarization Response of a Corrosion-Resistant Alloy: Phase II

Effect of Processing Parameters on Fabrication of Mo Sheet High Powder Metallurgy

The Evaluation of Various Cladding Materials for Down-Hole Drilling Applications using the Pin on Disk Test

High-Density-Infrared (HDIR) Densification of Thermal Spray Coatings for Spherical Surface

Heat Transfer Modeling of Continuously Cast Aluminum Slab

High-Energy Efficiency Wire Annealing Method

The Measurement of Moisture/Water Content in Recycled Aluminum Scrap and RSI

The Mechanism by which Boron and Zirconium Improve the Resistance of Haynes 214 Alloy to Strain Age Cracking

The Mechanisms of Oxide Formation Found in Solidified Aluminum 5182 Alloy RSI

Melting of Experimental Alloys for Corrosion Studies

Metal Filling of Lost Foam Castings

Methods to Improve Aluminum Smelter Hardware Materials

Methods to Improve Anode Rod Preheat Energy Requirements

Microwave Activation of Catalysts

Optimization of IR Imaging of the Lost Foam Metal Casting Process

Optimized Heat Treatment for Cast A356 Aluminum Wheels

Optimizing Induction Heating to Obtain Profile Hardening of Gears

Process Improvements for Complete Oxidation of Copper Chops For Ease of Production of Fine, Easily Compactable Cu and Cu Alloy Powders

Quantifying and Correlating Lost Foam Pattern Properties with Metals Fill Casting Performance: Understanding the Process

Qualifying Production Grade Foam and Coatings with Real Time X-Ray, Infrared and Capacitive Methods for the Lost Foam Casting Process

Study of Pyrolysis Product Generation and Behavior in the Lost Foam Casting Process

Thermal Conductivity vs. Temperature Measurement of Nanostructured Insulating Materials

Thermodynamic Simulation of Porosity Potential in Ductile Irons

Utilizing Graphite Expansion to Compensate Solidification Shrinkage in High-Strength Gray Cast Iron

Weld Pool Dynamics and Its Effects on Weld Profile and Properties of High-Strength Steels